Hey guys, I would give you a massive story, but I can't be bothered right now, so i'll give you the basics. Completely standard, some minor scuffage on the front bumper and a busted indicator stalk. Door lock is different to the ignition and the remote central locking didn't work as a result. Oh, and it tried to set fire to itself after one of the HT leads decided it wouldn't insulate anymore and short out back to the distributor.
So far I have fitted the aero blades from my old Arosa, re-programmed the remote key for the car and replaced all four leads.
Phew. Now, no-one likes a pictureless topic, so here you go
Nice little cameo from the Arosa there
Did the whole re-routing the Cassette Aux cable round the back of the headunit job
I do like these seats
Surprisingly large inside
Paints not in bad nick either.
So there you go, I suppose you'll want some plans as well? Right, first of is getting it running right, probably a full service to try and bring back some lost horses, then fixing the little odds and sods like the indicator stalk, the drivers mirror (just get a stubby) and the bumper damage. After that i'll get some coils, get colour coding and replace those god awful 13's. Might try and source the rear beam from a cupra or polo GTI for discs on the back if anyone knows thats possible? Ooh, almost forgot, i'll be fitting my sub and amp combo in at some point as well, so that'll be quite high on the list.
And to finish off, a nice photoshopped plan for you to look at
Woot? You bought that?
A friend of mine sells his cousin's ABT Ibiza!
You like them funky ass seats, don't you
Nice!
O.o them seats have got to be swapped lmao
cool yo
hope the radio gets out, when the power is off.
our old Seat always played the radio, even when power was off. (same kind of console as yours.)
Lily is in nice nick, keep care of her.
lol agree about the seats, you like weird seats.
Get nicer wheels than what you shopped. They look like factory wheels that were rattlecanned black. Get something sportier and less cheap looking.
Very cool, did you buy these seat covers at 99 pence mart ?
Sporty wheels would look dumb imo. OEM+ is dope. Audi wheels
^ bentley wheels is where its at
They're pretty ugly imo, I'm a fan of Maybach wheels, but neither of those suggestions would fit I'm pretty sure. Plus, they're not cheap lol.
Those wheels are the VW Estorils, only reason i want monoblocks is to hide the drum brakes at the back lol, if i got a disc conversion then 'sportier' wheels would be on the cards
yed but with a dESERT CAMO painjob
So i did this:
Then i did this
Then i washed her
And i've just bought some coilovers ^_^
Magical $200 coilovers? lol
also, hate to sound like a penis... but I can't tell what you did
Deletion of the wiper lol and changed the Ambers to white
Second hand
Double post, so sue me.
Collected the coils today, looking at them, i reckon they might be the JOM Blueline coils. All in good nick, just gotta buy all the droplinks and top mounts now
top mounts you can reuse from stock springs (on my golf i could atleast)
herd JOM aint that bad
tape the coils in with tape and duckt tape like me if you don't want s**t with them
Aye but they wear over time, and on a bone stock car with 80k miles on the clock, i don't imagine they've ever been replaced!
No Lights, No flash. LED's work.
also.
this.
Still yet to settle, need to balance the heights, and need to get the alignment sorted as well.
Gay
What? Too high? Too low? As I said they're still settling so they're a bit lower now
So this happened:
Then this happened.
Tyres aren't completely shot yet, but i've put the 13's back on for the time being. Why do alloys command so much money?!
thats what you get for running phat tires
phat tires are awesome. I plan to run lower offset with wider tires because I'm ballsy like that.
also i like the way that the jom coils have a thread all the way down <3
fu ta technix
kinda abandoned the thread lol
Old wheels back on, fully tinted lights and de-badging
Smoked the front badge, yet to do the rear
Put new alloys on
Rolled the arches
Got my spec sheet for Inters
Couple of the shots from Inters
So yeah, thats where I am thus far
next on agenda
17x8 -15 with 195/40r17s
plebus
no 17s, he lives where they have decent roads, so go on 15s or 16x8s and looooooooowwww
gotta have a couple wood boards handy, then you can make it less steap. I remember when my brothers freind did that to get his accord in the carwash one time,lol.
Edit, also, wish you lived closer, I think the rims I got in the shed would look sick on your car,lol. And they are just getting wasted.
2012 no excuses
gotta learn to angle.
https://maps.google.com/?ll=52.405836,-1.503746&spn=0.000211,0.000577&t=h&layer=c&cbll=52.405836,-1.503746&panoid=51L8kBjFnlzeuy1st0BYIA&cbp=12,135.98,,0,0&z=21
Angle is not an option
it takes skill to hit a stantionary object.
Patience is a virtue, I must say.
why no le handbrake angle correction?!?!
The point i was getting at is that i can't approach the drive at an angle to get the car off the curb.
how much does repairing cost?
doing it myself, so nothing.
Funny guy!
Getting new tyres for my MG wheels based on my three spokes selling, 165/40r16, exactly the same as what this guy is running
Just need to wind the coils down a bit more to sort the arch gap
would look nice!
Just got offered a set of these for the 3 spokes, or cash in hand. I'm still yet to get tyres for my hairpins. What do!?
I like those better, get em
or do i get the cash and get tyres for these
Depends on the look you want to go for. The others are more trend-whorish/VIP wheels. but I think the hairpins look more OEM+
I think you should do the trade, those other rims look nicer.
Fully sick
No.
swagflush
hella NO
http://www.youtube.com/watch?v=iTGR6IAYQAc
gotta do what you gotta do
that's sick. go low like that but with them wheels on that black ibiza
It begins
Why weren't you using these before? I don't remember.
BTW, these remind me of the Acura Enkeis I got for my civic back in the day that ended up having the wrong bolt pattern
The tyre sizes were wrong, they were from a much bigger car, these tyres are now slightly smaller than standard
not sure whether to get bigger spacers, or just rock the tuner tuck
I'd go for spacers, but personally I Really like a mean stance Especially on the rear
Alternatively, you could save up your money to get wheels that fit how you want.
Thats not an option with oem wheels, you get the size they came in or nothing at all
Why do you need oem wheels?
Aftermarkets come in 2 forms, Expensive, or ugly as hell. Oem wheels are cheap and look good in most cases. Just they all come in 'sensible' fitments. These ones are 16x6.5 et45. Fairly standard for a fwd sports hatch
Get some Konigs bro. Although they might be more expensive in the UK cuz they are made in america :/. The set I got was like 600 usd but they would be too big for your car anyways so they would be cheaper sized for this.
get these
they are OEM
$600? Thats cheap? I bought these for £60 lol
also this:
Lilly, get some Borbet A's
i agree with the MIV
I am Le Poor.
https://www.facebook.com/media/set/?set=a.4580855410495.204410.1565227316&type=1
In other news, GTI Festival
any belgians?
Didn't spot any, its not a massive show, i couldn't see people making the effort to be honest
then get your ass to UD, i'll be there again with the a5, maybe i'll be going to E38 next year with the vento
I did ask the guys if we'd be going to UD, and the guy running events said he'd work out interest and try and get a stand for the club so yeah, should see you there man!
I'll be there too. I'm making the drive.
I hear the Bering Strait is particularly frozen over this time of year.
naw man transatlantic car ferry ;D
Mike, GTFO
^_^ Much love
14" SSR with rubber
Dunno why I feel shakotan stance would look so cool on your car lol
In what way
got some centre caps
and drove into a wall
also never had a photo of the headunit in the car
you know, you should get on a bike again, always wrecking your cars
Yeah, on the bright side, at least i have an excuse to buy a cupra rear bumper now
and get both sides of the car painted
Decided to take the car another direction, going to build an almost pisstake jdm style car, if you don't know what that would entail, shame on you, but here's some photo's of things that have inspired me:
I think you get the idea!
I'm sure its probably been done before, I do not care for originality or being "scene," I'm just having a laugh with my £750 s**tbox
dat modern day ricer
good one
I kinda think the march is cool Be the first to stickerbomb your entire car
duct tape a carrot on it
bunny poawaa--==== gooo2222
BALLSOHARD
put VTEC in it, then turbo and then you will be the swagest seat owner
meeeh, dont do that
#morepikeythanyou
SWAG
Needs mexipoke
LED Sidelights
HID Dipped
Really chuffed with how they both came out
the led's are cool. But HID's in normal halogen housing without projectors is one thing that will always annoy me. It creates an incredible glare for oncoming vehicles and is more really just effective at being really overly bright rather than creating better visibility.
That did worry me at first, but after driving with them, and checking the beam pattern (I have a nice flat wall in my compound) the glare isn't all that bad to be honest. To help things i've set the beam height to as low as they will go for the time being. Passed 3 police cars today and not one of them reacted, so its cool
nice
put some LEDs in your fenders and get flat black disk wheels and it will look like you are hovering at night
Put the car on the steelies to paint the wheels
Swag.
Really chuffed with how they came out though, took my time to properly finish them ready for sale.
still attending UD?
Yeah I will be, not on stand though, my car will be outside and i might be seen hanging round the IOC stand
Haven't got any pics because nope but I had a big update over the weekend ^_^ Stubby mirror and a full audio overhaul, all the standard speakers replaced with decent units. Only 250w all round but un-amped so they sound great plugged direct from the headunit. Had them maxxed earlier with no distortion at all, really chuffed Other than that I'm doing a deal with a guy I know, switching my hairpins with his standard alloys part ex. Will use them as my spare wheels so I can get rid of those godawful steelies, and will be buying a proper set of alloys when I find something I really like
Almost like a log of my work this, just talking to myself
firstly the standards I took after part-exing the hairpins
Yeah instafag, what you gonna do Going to be rocking these until either something really cool comes along, or a certain special set i'm looking at come up for sale
Really like these atm:
Cades Blast, 15x8 et20. £360 brand new no tyres. Really want a set but i can't justify that sort of money at the minute
However, for £300 I could get a mk3 golf gti 16v. I very nearly bought one this weekend but I realised I have nowhere to put it until I do the swap in may time >.< if i find another one cheap though i should hopefully have an abf before inters
finally, actual update
Drift charm swag
imgs broken dood
bbs chs?!?!?!
lol try again
better pics/proof pls
once i've lowered it more to get the stance bang on i'll get some more up
yea slam it man, another 5 inchs would just about do
thats what she said
Had a day down at the garage prepping for the MoT Tuesday. Fixed my bumper, serviced it, and fixed some little problems i was having with the wheels. Had a knocking sound from the front which turned out to be a knackered lower ball joint :/ Tried ordering the part but it never turned up, hopefully I can get it fitted before tuesday
Pictures ^_^
So I finally got the vinyls made for my page!
Go give us a like
i think i already have aha i didnt even know it was your page aha
edit: btw car is looking sexy
Unfortunately going to have to put the car in s**t mode in order to get it MoT'd
Grounded on the rollers before they even started testing. Balls
Whoooooooopsy!
#hellaflush #lowlife #stancenation #stanceworks #slammed #stretch #euro #jdm
Ugh. Sadface
Bricks Shat
Wut.
how?
I cant even imagine how you can do that to an axle stand, wheres it from?
Car swung over bending and snapping the bottom strut, then crushed it, buckling the other two. luckily the remains of the stand held the car up enough to stop the hub and brake disc from hitting the floor
halfords tools for you that is
Well... s**t.
:/ excessive corrosion was that?
can they repair the corrosion?
just a bit of rust around one of the subframe bolts, need to get it welded
Those wheels are sweet, nice man.
A bit of rust around the bolt they said
It will be easy to repair they said...
Lame. So you can't pass mot with rust?
not if its on a structural part of the car, which this is. had it have gone undetected my subframe would have just fallen out
That was the extent of it
Made a new bracket quite badly, one of the professionals finished it for me
Then welded and undersealed it all. Retest is on tuesday
Woop you should be dandy! At least your car has a floor My fiesta doesn't
your mot seems not that strict to be honest, over here they would have killed you for a small (maybe a little more, but nothing rotten trough or going to rot through in the next 2 years in any way) amount of surface rust
Its about general safety of the car really. Some body rust doesn't matter, as the car wont fall apart, but structural stuff like what i have will fail as the car could collape if left untreated. There are some other paint in the ass ones like 'sharp protrusions' which can also cover rust to an extent; its anything that you could cut yourself on if you brushed past it. Then theres simple stuff like 'adequate clearances' where the wheels, tyres and associated components need to have enough room to move about in the arch without touching anything. Its so easy to get an MoT though, not falsified, just people that have the power can give you an MoT without really checking it, but then that can lead to some really unsafe cars on the road, so i'd rather get a failed MoT on an alright car than a pass on a shed.
99p bumper on ebay, winner! Just got to make the splitter fit now. Thinking if i trim the upper flaps off i can heat it up and bend it round, then plastic weld it all in place. any other ideas?
Id say your idea is probably your best bet.
that looks like a civic replica lip.
Thats because it is EG civic mugen replica, even says it on the sticker on the inside, got alsorts of japanese s**t on it
DAT LIP .. Looks awesome!
that's not a mugen replica. mine is. That's a type r replica.
Close enough Its getting hacked up either way
pretty cool lip man
lip suits it perfectly man
cars turning into a pimp moblie
Its very close to the lip I was going to get for the silvia if I kept the normal turbo bar.
Lowered it
Then cleaned it.
Can't help but look at the photo and think it should go down more, but this is as low as is practical for where i'm living atm, maybe when i've moved out in july
Looks good man, and i know that feel.
I could go lowere where I am not having to many scrape issues, but due to the way the inner arch is I cant
I want to go lower in the front but I also want to buy a lip... I too am torn.
Why not both?
I scrape as it is. Lower in front + $500 lip = waste of $500
then buy a cheap replica like i did for £20
in other news, day out in the sun
They don't make replicas.
Make one then.
your s**t is overpriced. That's probably $30 worth of plastic $40 at most.
step off the step
back on topic
curtis any plans on boso pipe
GOD DAMN!
Mitch, I'm looking at getting a cupra back box, but i need to make a cut out in the bumper for it, doubtful that i'd get a boso pipe, wouldn't really suit it imo
Aww cheers mike
<ban_user 'Self'>
My number plate fell off...
598 doe
s**t just got real
is that
a
window wiper
Two is better than one!
curtis told me he's going to put box arches on the rear of his car and a lancia delta evoluzion ii style spoiler on ignore all of my suggestions because he's poor and/or lazy
do it curtis
Some photo's from last weeks meet
Successfully chipped some paint off a speed bump
#lowlife
fitted some spacers for moar stance
Need to lose the bump stops to close the gap between arch and tyre
and finally, a nice before and after shot
Removing the bump stop is one of the worst things you could do. Allowing your shocks to bottom out is absolutely terrible on just about every component of the suspension. Get some proper monotype coil overs or some aftermarket shocks.
The shocks are already f**ked, i'm aware of the implications of shortening the bump stops, i'm just ignoring them
wash this thing man, get new plates... car looks all beaten up like this :/
The car is beaten up lol, there's no point polishing a turd
Nah man, it isn't... mine is 10x worse and I still take care of it... at least make those wheels shine again, and keep the dirt away from it, pretty sure it would look 10x better... you're a gearhead dude, you enjoy cars, act like so!!
Sudennly! Foglights!
They don't work.
Suddenly! Black Badge!
Its sprayed s**t.
Suddenly! No arch gap!
The fronts still have 2 fingers worth of gap.
wow havent looked in here for a while, very cool
can still fit finger in gap
and you say no gap
wtf is this
I'll leave this here for you:
yeah i think the arch gap would be less noticeable with less stretched tyres
less stretched tires it would look mexipoke too much. and mike, damn, you roll like that or the car is up somewhere or on a driveway, or something?
On driveway with loaded trunk
I've rubbed before taking a fast turn with people in the backseat. lol
Please, do tis.
if that civic was lower and had white walls i swear
rim lip touching guard or you might as well just leave it standard
So then, i've been a bit quiet lately. A lot has happened.
Got my fogs and indicators all re-wired
https://www.facebook.com/photo.php?v=10201561594112777&set=o.2210814918&type=2&theater
Went to Inters with everyone, had an excellent time
Got my boot install rebuilt
And then my pedal box collapsed.
Got that replaced and back on the road, for the battery to die on me as the brake pedal didn't return fully, leaving the lights on.
Needed to get the bumper and splitter out of my parents house, so with a drill and some zipties, mashed that on as well
The budget box is starting to take shape now
Sweet
Pink zip ties are cooler though
sitting really nicely. I also really like those rims. what rims are they and how big are they (sorry if you posted that before, I was too lazy to make a research)
They're Cades Blast's, 15x8 et20. Got a 20mm spacer at the back and a 10mm at the front.
Plenty of life in them yet.
Yeah they had to come off, picking up new tyres tonight
if they only made those rims in 14", too :C
Its a fairly common design, there must be someone that makes them in 14" form
New tyres are now on and the fronts are wound down as far as they will go now, really happy with how she sits at this point.
This is not to say it has been plain sailing at that height >.<
Easily fixed though
Bonus shot of the Biza next to my mates 'Project 50'
dat aint no audi..
Its being built to see what the AUdi 50 would look like if it continued production
f**k your airbags
hmm
*thumbs up*
Suddenly:
Also had a photo taken at the meet by one of our slambox photographers
s**ts on point
underbody l.e.d's go
Seriously don't tempt me
I s**t you not, that would look sick
f**k you Mitch!
that does look pretty rad... although no to the D1 banner.... wtf
I think the D1 banner kills it tbh :/ Second sickest seat I ever seen tho
f**k me it does look cool
Lmao im so cool
D1 banner is the cooliest TBF that is the reaction i'm hoping for
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)