Welcome to Pixel Car Art

[DMC-12]

Okay guys, I know we've had these threads many times, but it's always a bit of fun.

So, name your dream 3 car, 1 bike garage! Include pics and specs for your choices. You must stick to these numbers! No cheating!

1.
1982 DeLorean DMC-12

• RHD
• Black interior (with clocks that go higher than 95mph...)
• Type 918 Lotus twin turbo V8 with uprated 5 speed manual to accept the full 500bhp the engine can produce
• Lotus suspension and running gear
• Removal of marker lights
• Black side stripe
• US Spec tail lights with full size UK plate (can be done by removing the US plate holder. also euro spec tails were from a bus)

(IMG:http://i445.photobucket.com/albums/qq180/xbrules/2011-08-04_12-10-55_319.jpg)
(IMG:http://www.entermyworld.com/cat/custom/lc/lcc.jpg)
(IMG:http://i.imgur.com/oWOPr.jpg)

2.
1971 Ford Cortina GXL

• Daytona Yellow
• Cosworth YB N/A with Hayabusa TBs
• Sierra cosworth running gear and suspension
• Slot mags <3
• Black vinyl roof
• Black interior with "wood" trim
• Decent sound system with nothing visible except black mesh speaker covers.
• Subtle Cosworth badge on rear panel
• Wing mounted mirrors

(IMG:http://i.imgur.com/F1CXM.jpg)
(IMG:http://imagehosting.rodsnsods.co.uk/1174b9d1d039abf2.jpg)
(IMG:http://farm4.staticflickr.com/3163/2587224700_ee3d802b34_o.jpg)

3.
1969 Dodge Charger R/T

• 426 Hemi
• Tightened up steering and suspension (so it can actually turn)
• '75 Corvette Flame red
• American Racing vector rims
• Pushbar
• Tan interior
• Okay it's a general lee replica...
• But with all the sexy chrome trim
• Working CB (not that i'd ever use it)

(IMG:http://img.photobucket.com/albums/v231/JB666/DSC_2111Large.jpg)
(IMG:http://img.photobucket.com/albums/v231/JB666/DSC_2035Small.jpg)
(IMG:http://i371.photobucket.com/albums/oo154/TheNovaMan/Lane%20Show%202009/IMG_4555.jpg)

4.
2006 Yamaha YZF-R1 LE

• Yoshimura carbon cans
• gold anodised rearsets and levers
• Marchesini forged magnesium rims
• Titanium nuts throughout
• Renthal chain/sprockets
• Tidy rear end
• Smaller indicators

(IMG:http://pictures.topspeed.com/IMG/crop/200603/2006-yamaha-yz-r1-le-30_1600x0w.jpg)
(IMG:http://fc09.deviantart.net/fs51/i/2009/305/0/d/Yamaha_R1_by_zentraveler.jpg)
>mfw it's basically my dads bike
(IMG:http://okayface.com/okay-face.jpg)

So, lets get some discussion going! (IMG:style_emoticons/default/toothygrin.gif)

This post has been edited by The Dude: Feb 16 2012, 02:58 AM

[Dj-san]

1.
(IMG:http://i1188.photobucket.com/albums/z407/djsweetness/ResultS13-1.png)
1990 Nissan Silvia S13 | 550Bhp | 1235Kg | Intercooled VR38DETT


Engine Mods
VR38DETT Engine Swap:
-VR38DETT (530Bhp): $20,000
-ECU&Harnesses, $1200
-Engine mount kit $2200 (includes driveshaft, mounts, etc, everything but harness and ecu, tranny, and engine)
---
ECU and Electronic Mods

Forced Induction Mods

Cooling, Intake and Exhaust Mods
HKS Intercooler for VR38 Motor: $4,500. +20hp.
HKS R-Type intercooler kits are large front mount units that offer the ultimate in cooling capacity. R-Type intercoolers have been engineered to maintain efficiency on applications rated up to 800HP. Measuring 600mm X 302mm in frontal surface area, R-Type front mount intercooler kits maximize cooling efficiency. The 97mm thickness of the core allows for unrestricted internal airflow of pressurized air without affecting external airflow to the radiator. R-Type kits can be used with a stock turbocharger, and are recommended for highly modified turbocharger applications.
---
Drivetrain, Brakes and Suspension Mods
Tien High Performance Suspention Kit: $1,500
---
Brembo Brake Kit: $1,500
---
Chassis and Reinforcing Mods
Front End Tube Chassi: $4,500
---
Exterior and Rim Changes
Exhaust rerounted out the front light slot
---
Replacement light from a not so popular car from a very unknown Manufacturer
---
Steelies
---
Front Right CF Fender (Painted): $600 -1kg
---
Front Left CF Fender (Blue): $600 -1kg
---
Interior Mods

Other
Custom Built CF Engine bay: $6,500 -30kg
---
200Kg Ballast mounted in the trunk: $200
---
30 Gallon Fuel Tank: $350
---
Weight Reduction Kit (All but 2 seats, radio, and speakers removed): $free - 15kg. removed all sound deadening, carpet, headlining, and interior panels.
---

2.
(IMG:http://i1188.photobucket.com/albums/z407/djsweetness/My720-1.png)
Datsun 720 | 716Bhp |701Kg | RB26DETT

Engine Mods
RB26DETT Engine Swap (R34) 320Bhp: 15,000 for FULL swap
----
Titanium Springs - Made from one of the hardest metals on earth, and also one of the lightest, our valves springs can withstand the harshest of conditions.
Price : 80 per spring (x24 $1,920)
----
Titanium Coated Valves - For smooth and complete combustion, you need good balance with everything, and when coupled with our light springs, these valves will work exactly how the camshaft wants them to.
Price : 1.200 for a set (x6 $7,200)
----
U2 Street Piston Rings - To keep the combustion from leaking, our piston rings are made from slightly heavier aluminium/iron alloy, but your engine wont burn oil either.
Price : 150
----
U2 Super Heads - Made from aluminum, these heads are lighter and more durable, after being port and polish even before they are shipped, these offer the best top end for an engine anywhere.
+24HP
Price : 3,500
----
RB28 Stroker Kit - Takes any RB26 engine and throws in our forged parts to increase the power and flatten out the torque curve, bores engine to 2.8 Liters.
-U2 2.8Pistons
-U2 2.8 Crank
-U2 2.8 Camshaft
-U2 2.8 Conrods
Cost : 4,500
+58HP
----
Blitz Dual Drive Blow Off Valve, Universal
The Blitz Dual Drive BOV is one of the highest quality BOV's available on the market today. Expect a loud "whoosh" of air when you let off the throttle. This BOV includes the mini-filter to prevent any blow-by oil from getting all over your engine bay. This filter is a Blitz exclusive and very nice to have!As will all Universal BOV's, you will need to purchase an aluminum or steel flange to weld onto your intercooler piping. Then you mount this Universal BOV to the flange you weld onto your aluminum or steel pipe.
Your Price £187.00
----
ECU & Electronics
BLITZ SBC i-Colour Boost Controller

Features:
Full Boost Control and Power Meter Functions
Full Colour (65,000 colours)
Digital and Analogue Displays
Sequential Valve Control (Spec-R only)
Automatic Correction of Boost Pressure(Initial Learning)
Fuel Consumption Function
Prices:
Spec-R - $888
----
U2 Stand-Alone ECU - I just got this thing and with a much more friendly interface, changing engine parameters should be a snap.
+0HP
+2W
Cost : 3,800
----
U2 Ignition & Coil System - Faster and higher voltage spark for a quick burn along with a much better spark plug design for that last bit of power. Along with an improved ignition box
+15HP
-1W
Cost : 3,500
----
U2 Battery - Heavy Duty and can work in any situation without drainage, can last up to 450,000 Miles. More suited for racing applications.
+2W
Cost : 1,100
----
Forced Induction
APEXi - RX6B Turbo Kit
$1900 +150hp
----
Cooling, Intake, & Exhaust
BLITZ Racing Radiator LMC
A suitable upgrade for those after high power output from their engines, the BLITZ Racing Radiator provides adequate cooling for even the hottest engines whether on the track or in spirited driving moments on the street.
Price: $875
Gains: +8Hp
----
BLITZ Oil Cooler
During extreme conditions, especially in high-horsepower output vehicles, the oil can breakdown chemically causing inadequate lubrication resulting in damage to the engine and turbo. BLITZ® Oil Cooler kits were designed to effectively maintain oil temperatures at acceptable parameters to prevent viscosity breakdown.
Price: $900
----
BLITZ LM Intercooler
Each BLITZ® Intercooler Kit is individually design for each vehicle produce maximum efficiency and performance. All BLITZ® intercooler kits come complete with aluminum piping and all the necessary hardware. Intercoolers provide more power and reliability to any turbocharged vehicle. Intercoolers are heat exchangers, which are used to quickly cool down and dissipate the heat from the intake charge.
Price: $1,020
Gains: +18Hp
----
Transmission Cooler #ATC500
As with the engine oil cooler, Turbo Specialties offers the same high performance automatic transmission oil cooling.
Features: This unit also comes with mounting hardware, hoses and connection adapters.
$160
----
BLITZ SUS Power Air Cleaner
Price: $500
Gains: +15Hp
----
BLITZ Sonic Power Filter System
Price: $350
Gains: +12Hp
----
Drivetrain, Brakes, & Suspension
The BLITZ Active Clutch was designed to hold maximum horsepower while retaining daily drivability. The Active Clutch is a complete clutch assembly that includes flywheel, pressure plate, clutch disc, and all necessary hardware. Our clutch systems weighs an average of 15%-20% lighter then stock. The unique feature of the BLITZ Active Clutch is the ability of change the clutch from a single disc clutch to a twin disc clutch. This allows the user to choose the correct clutch according to the power of the vehicle.
Price: $1,650
Gains: -10Kg
----
Cusco 1.5 L.S.D. Type-RS
1.5 way rear LSD
Activates under acceleration while the understeer is less than on the 2 way LSD.Recommended for drivers having difficulty with 2 way LSD understeer and one way LSD braking
$787.00
----
BLITZ Realise TT/TT-R Exhaust System
Price: $900
Gains: +13Hp (Re-directed out front-right-inter-light-port)
----
StopTech Big Brake Kit
$3,460
----
Cusco Front control arms
$160.00
----
Cusco Pillow Ball upper mounts
$215.00
----
CUSCO REAR LATERAL LINKS
FEATURES:
- Controls unwanted forces under acceleration and braking.
- CUSCO's pillow ball joint lateral links are designed to secure traction in drifting and stability during acceleration under high speed cornering. Most effective when fitted with racing tires or bigger than production size tires.
$145.00
----
CUSCO LOWER ARM BAR
good for:
Reducing alignment flexing and improves body rigidity.
The lateral arm improves body and rigidity by connecting at the lower arm points. Thus preventing body flex and therefore dramatically improving steering, throttle response and traction.
$83.00
----
Cusco front pillowball tension rods
Reduces the amount of suspension flex during hard cornering.
- Increases greatly the handling response going into corners by adopting pillow ball mount on the body side. High rigidity pillow rods balls used to hold down tires under braking. Increases straight line stability by reducing toe out and friction
$565.00
----
R2 Racing Front Camber Correction Kit
£145
----
R2 Racing Rear Camber Correction Kit
£145
----
BuddyClub Racing Spec Coilover Kit
Gains: +/- 3 Pixel Ride height
Price: $3,500
----
U2 6 Speed Sequential Transmission - Specally designed from people who want the best performance possible. Our 6 speed is fully adjustable and compact so as to fit in any car. Can handle up to 600HP
-40W
Price : 6.000
----
U2 6 Speed Sequential Gears - Made for our transmission, these heavier gears can handle more power at the expense of increased weight. 1200HP limit.
+10W
Price : 2,000
----
Chassis and Reinforcing Mods

Exterior and Rim Changes
Carbon Fiber Body:
includes fenders, quarter panels, doors, bumpers, hoods, trunks, etc.
NOTE: YOU DO NOT NEED IF YOU GO CF WIDEBODY!!
$10,000 - 425kg
----
Head light Removal: free - 2kg
----
Grill Removal: free -3kg
----
Painted Trim: $230
----
R34 Rims: $2,000
----
Matte Paint: $800
----

Interior Mods

Other
Nitrous Express ''N-Ter'' Cooler Chiller System - 15 Pound Bottle Included
Your Price- £423 +52HP
----
Nitrous Express Remote Bottle Opener
Your Price £231.00
----
Nitrous Express Bottle Blanket for 15 Pound Bottle
Insulated bottle blanket to help keep your nitrous at the perfect temperature!
Your Price £133.00
----
Nitrous Express Gen-X Kit
This kit includes a bottle heater, pressure gauge, fuel switch, and blow down fitting.
Your Price £312.00
----
Like Yokohama’s original PARADA Ultra High Performance tires, the first thing about PARADA Spec-2 that grabs your attention is its wild-looking, asymmetric tread design. And when you combine that with its ultra low profile sizes designed to complement the large diameter wheels used on the most impressive street tuned vehicles, you’ll find that PARADA Spec-2 tires exude performance. The biggest reason for the PARADA Spec-2’s enhanced performance is its high grip, silica-reinforced tread compound. This new tread compound is molded into an asymmetric, ultra-low void outer shoulder tread design that uses large tread blocks to provide rubber-to-road contact that reduces tread squirm thus enhancing response and dry road cornering control. Massive diagonal tread blocks reach across the tire’s footprint to further increase cornering stability and dry road traction. A solitary, ultra-wide Circumferential Groove helps water flow through the tire while long, helical grooves evacuate water from under the tire’s footprint to increase driving confidence in wet conditions. Internally, twin steel belts are reinforced by spirally-wound nylon strips to provide long-term durability under high speed conditions while reducing weight and providing a more uniform ride quality.
£145 EACH ($580)
----
BLiTZFuel Injectors
1000cc - $250
----

3.

(IMG:http://i1188.photobucket.com/albums/z407/djsweetness/80sCivicSedanRepo.png)
Honda Civic 1.4 | 489Bhp(Run 2) | 700Kg | FR | H22A

D1
(IMG:http://i1188.photobucket.com/albums/z407/djsweetness/MyCivicSedan-Copy.png)

Upgrades:
Engine Mods
H22A:
(IMG:http://i1188.photobucket.com/albums/z407/djsweetness/Untitled.png)

$151,048 - $800 = $150,248
------------------------------------
U2 Low compression Turbo pistons - Made from sturdier, but heavier parts than our NA pistons, these are designed for Forced induction applications and offer effecient combustion so little fuel is wasted.
+5HP with FI
Price : 250 with any engine config
------------------------------------
U2 Forged Crankshaft - To convert all that up and down into spinning motion, you need a crankshaft, our forged crankshafts are carefully balanced for optimum rotation.
+12HP
-1W
Price : 3,400
------------------------------------
Titanium Springs - Made from one of the hardest metals on earth, and also one of the lightest, our valves springs can withstand the harshest of conditions.
Price : 80 per spring(x12 = $960)
------------------------------------
Titanium Coated Valves - For smooth and complete combustion, you need good balance with everything, and when coupled with our light springs, these valves will work exactly how the camshaft wants them to.
Price : 1.200 for a set
------------------------------------
U2 Forged Conrods - Basically the weakest link in the chain, these are a must for any high performance application.
Price : 300
------------------------------------
High Profile Cams - These camshafts were designed for one thing and one thing only, Power, complete low end torque is sacrificed for high end power, so make gearing closer, and get other parts to help support the higher revving needed.
+20HP
Price : 1,000
------------------------------------
U2 Street Piston Rings - To keep the combustion from leaking, our piston rings are made from slightly heavier aluminium/iron alloy, but your engine wont burn oil either.
Price : 150
------------------------------------
Port and Polish - With our machines, we will port and polish your heads for much better flow and better atomization of the fuel for more power out of every gallon.
+36HP
Price : 1,400
------------------------------------
ECU and Electronic Mods
U2 Ignition & Coil System - Faster and higher voltage spark for a quick burn along with a much better spark plug design for that last bit of power. Along with an improved ignition box
+15HP
-1W
Cost : 3,500
------------------------------------
U2 Battery - Heavy Duty and can work in any situation without drainage, can last up to 450,000 Miles. More suited for racing applications.
+2W
Cost : 1,100
------------------------------------
Forced Induction Mods
Type : U2 Stage 2 Single Turbocharger Kit
Complete Kit : U2 Crankshaft, U2 Superheads, U2 Conrods, Low comp pistons, U2 Hot Head R-31 31mm Turbocharger, Piping, BOV, U2 Extreme Intercooler, U2 Stage 1 ALS SYSTEM
This U2 Stage 2 Kit is the upgrade for any crzy gearheads who want absolutely massive power needs, and adds a realiable 180 horses to the stage 1 Kit , with our brand new Hot Head Stage 2 36mm turbocharger, with our stage 1 Anti-Lag system, your car will run with big block torque and with our eXtreme2 intercooler, your engine wont overheat, the low comp pistons and conrods to help uphold the power..
Price : 16,700
+180HP
+25W
------------------------------------
Cooling, Intake and Exhaust Mods
U2 Cat-back Exhaust system - Now to help with the other side of breathing, our revolutionary Cat-Back system lowers exhaust tempatures and nearly deletes backpressure, though a little bit is needed. This system is also extremely light compared to OEM systems
+25HP
-10W
------------------------------------
U2 Cold Air system - With less curvers and more straights, the U2 cold air system delivers cold air to your engine for a more complete combustion, the polished aluminum also makes your engine bay look even better.
+6HP
Price : 120
------------------------------------
Drivetrain, Brakes and Suspension Mods
Koni Threaded Suspension Kit: $1,320 (Lowers I-4 pixels)
------------------------------------
Driveshaft - 3,500 +15W
S2000 Rear diff - 700 +25W
S2000 Axles - 400
------------------------------------
Brembo Gran Turismo Brake Systems
Type: Full Brake Kit (all around)
Gran Turismo Brake Systems packages combine high performance fixed aluminum brake calipers, large diameter 1- or 2-piece vented brake rotors, brake pads, stainless steel braided brake lines and aircraft quality mounting brackets and hardware.
Price: $2,660.00 -4w
------------------------------------
Chassis and Reinforcing Mods
'ENDURO' Cage: $800 + 11 kg
------------------------------------
Stage One - Removes carpeting radio, A/c etc, while leaving a passenger seat. Improves handling and all other aspects of the car.
-100W
Price : 1,200
------------------------------------
Stage Two - Removes sound deadening, passenger and rear seats, and replaces all windows except rear with plexiglass.
-200W
Price : 5,500
------------------------------------
Exterior and Rim Changes
Flares- $50/arch ($100)
Single Tone: $300
Decals: Med: $35
Falken ZE-512: $97/tire ($388)
4 Rims: $1,600
Interior Mods
TAKATA 4 POINT PROFESSIONAL HARNESS "LONG": $400.00
------------------------------------
Sparco S Light CF: $2,800 -12 kg
------------------------------------
Other

Nitrous Express ''N-Ter'' Cooler Chiller System - 15 Pound Bottle Included
For supercharged or turbo applications where nitrous is not an option, NX offers another alternative, the N-tercooler . Using either nitrous or CO2 this unit can reduce air inlet temperatures dramatically. In a recent dyno test, a turbocharged Honda, equipped with an NX N-tercooler , increased its baseline by an astounding 52 horsepower!
Your Price- £423 +52HP
-----------------------------------
Nitrous Express Remote Bottle Opener
Five years of research and development has finally produced the ultimate solution, the NX "Next Generation" Remote Bottle Opener. The NX Remote Bottle Opener is guaranteed not to effect horsepower output, or cause the surging sensation associated with current designs. It is furnished with all installation hardware and weather-pack wiring kit. Fits any brand nitrous system.
Your Price £231.00
-----------------------------------
Nitrous Express Bottle Blanket for 15 Pound Bottle
Insulated bottle blanket to help keep your nitrous at the perfect temperature!
Your Price £133.00
-----------------------------------
Nitrous Express GenX-2 Kit
This kit includes everything found in the Gen-X kit plus a purge valve.
Your Price £389.00
-----------------------------------
Nitrous Express Wet Kit - No Bottle Included
Stage One EFI single nozzle system
Utilizing the patented "Shark" nozzle, these systems are fully adjustable offering 35, 50, and 75 horsepower upgrades. These systems require no engine modifications, operate on stock fuel pumps, and require no timing retards. The ultimate solution to make your import a rocket! Any horsepower settings above the recommended levels require "NX Power Booster" fuel additive to prevent detonation.
All NX systems add additional fuel during nitrous usage by injecting it directly with the nitrous through their patented "Shark" nozzle. This method assures 100% atomization of the fuel and accurate air/fuel ratios.This system comes complete with 16 ft. aircraft style supply line, N2O filter, lifetime warranty nitrous and fuel solenoids with mounts, all standard jet settings, an NX patented Shark nozzle (nozzles), wide open throttle switch, a complete installation pack that includes all bolts, nuts, washers, wire, wire terminals, lighted arming switch, and complete instructions with pictures. To complete the installation a Gen-X package should be ordered with the system. This includes the bottle heater, liquid filled nitrous pressure gauge, low fuel pressure safety switch, and a external bottle vent fitting and plumbing kit. All NX Stage One or Street systems are designed to operate with no timing retard. Spark plugs should be changed to non-platinum style, 1 to 2 steps colder than stock.
For more answers to your questions about this product click HERE.
Your Price £469.00
-----------------------------------
Pretty boosted D-series

Baseline : 450HP @ 7,900RPM and 266 FT/LB @ 4,500RPM

Run 1 - This has tweaked settings for smooth delivery with this little thing. Also had to tame the rear end abit as it will be snappy.

305 HP @ 7,600RPM
220 FT/LB @ 4,000RPM

Run 2 - I turned the boost up closer to the max, and this for Wangan.

480 HP @ 8,100RPM
315 FT/LB @ 6,600RPM

Run 3 - This is a wangan map for true rep. This is max power at the cars current level.

535 HP @ 8,350 RPM
350 FT/LB @ 7,000RPM

Run 4 - This is for drifting, i worked hard trying to make this as drivable as possible. Transitions will be tricky though.

420 HP @ 6,700 RPM
300 FT/LB @ 6,100 RPM

Run 5 - General street race map, your rear diff isnt liking the power to much after these runs.

445 HP @ 7,800 RPm
288 LB/FT @ 5,400RPM
-----------------------------------
Dyno: 7/20/11
Baseline - Much better motor to base off of, she was bucking around like crazy on the dyno.

590HP @ 7,100RPM and 277 Ft/LB @ 4,900RPM

Run 1 - Low boost with stable torque curve for to make this easy to drift as possible.

430HP @ 6,200RPM and 235 Ft/LB @ 3,200RPM

Run 2 - Higher boost to get as close to your wanted HP.

489HP @ 6,500RPM and 255 Ft/LB @ 3,700RPM

Run 3 - Higher boost drift run.

520 HP @ 7,000RPm and 300FT/LB @ 4,200RPM

Run 4 - Max Power

645 HP @ 7,900RPM and 355 FT/LB @ 5,105RPM

Run 5 - Low boost wangan map.

455HP @ 6,100RPM and 275 Ft/LB @ 3,400RPM