along the bottom of the headlight.

Nahh you could put them vertically along the side of the front and rear windows?

Inside the car? Like in the trunk, or somewhere where it's not visible at first sight but still a cool place, maybe in the hood, or the bottom of the center console.

I'm not sure how big 8 inches is, but if it's what josh's d**k's size is, it should fit anywhere (IMG:style_emoticons/default/trollolololm[1].png)

Put them on the dash-passenger side above the glove compartment!



The engine bay is looking clean! You may have covered this but what kinda cam/camshaft are you running?

I will be running crower stage 2 (aka 403) cams in my b18.
They're window decals. won't stick on my dash. They work best on a smooth surface. aka glass or paint. but like I said, i'm not putting them on my paint because it's too hard to get them off without messing up the paint.

look what came today.

(IMG:http://sphotos.xx.fbcdn.net/hphotos-snc6/s720x720/181093_10150913690142088_586427087_9715371_1218976713_n.jpg)
(IMG:http://sphotos.xx.fbcdn.net/hphotos-ash3/s720x720/551771_10150913690452088_586427087_9715372_1740442195_n.jpg)

for the sticker, diagonally along the top of the rear glass? that way you could add some smaller ones above it if you want. either that, or put one on each side rear window, on the bottom

only put one on the rear

Had to make sure the header clears everything.
(IMG:http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/469932_10150924132957088_1273426762_o.jpg)

Just about ready to clay the engine. Just have to clean the cam caps in the wash tank at my dad's work tomorrow.
(IMG:http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/463382_10150924133192088_225724740_o.jpg)

mmm...
(IMG:http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/459330_10150924133332088_2088288153_o.jpg)

mmmm so shiney, Jred you should give me your old motor (IMG:style_emoticons/default/toung.gif)

This looks like fun ill be having to do the same as well rebuild a motor <.< yours looks so clean and fresh probably go like a bat out of hell when all button up (IMG:style_emoticons/default/excited.gif)

You probably don't want my old motor. It's a d15b7.

can't wait to hear/see this when its built (IMG:style_emoticons/default/toothygrin.gif)

Primered my intake tonight.
(IMG:http://i.imgur.com/Jo1WGl.jpg)

smooth as butter man, what color are you painting it?

OH and it wouldnt hurt to lug around an extra d15 (IMG:style_emoticons/default/toung.gif)

It'll be silver. Just wanted to clear up the corrosion and have it look nice until I can afford a new manifold or itb's.

i would chrome em, i love the way they look

Chrome is heavy and not something you would ever want to do to a cast aluminum piece.

high polish?

Have you ever polished a casting like that?
It would take ages of sitting there sanding it. I'd probably have to start at 150 grit and work all the way up to 2000 for a shine.
I work full time. I don't want to spend that many hours on my intake. Time I would much rather spend doing things that actually contribute to the swap.
Plus, it wouldn't really match. I'm not really going to have anything else polished.

bi-moto crx