Some of you may have seen http://www.pixelcarart.com/index.php?showtopic=42515 thread I made a couple of weeks ago. But if you didn't, my dad's LS400 was for sale, fast forward a bit and it sold. So obviously my dad was then without a car, now this is the 21st century and let's be honest, if you don't have a car, you're bollocksed. So the search was on, criteria was a sensible family car, under 2.0 and not silly money to buy and run (A lot like the Alfa he had before, but then sold, hmm...). Anyway a couple of days later he comes home with this
A 2001 Honda Accord 1.8i VTEC 'Sport' with 11 Months MOT for a very fair £750. Good buy I say, but as we all know some things are always too good to be true, and before we knew it, VTEC kicked in just a little bit too hard...
That is of course the car just after being towed home by a friend. The real story is that my dad actually bought the car with a slipping clutch, hence the decent price (Was originally up for £900). He thought he'd get at least a few more days out of it but it decided to f**k itself up on the way home, cue 6,000rpm and no movement. Still, one of them things. So now that's been replaced and it's all very good stuff.
We ordered a little something though...
Even though it looks like one it really isn't a dildo, or a vibrator for that matter. It is of course an über JDM tight dori dori dorifto sideways S14 AE86 Type-R 2JZ GT-R gear knob. Which means my dad now gets an extra 50bhp and he can drift his FWD car. So we fitted it, as you do.
The difference is immense, we beat a gay white and black Toyota with some stupid Japanese writing on it in a drift battle on the way home.
There's a list of jobs that need doing though, tidying it up mainly, you might be able to see the damage to the bumpers in the photos, the previous owner didn't really look after it too much tbh, so we'll get the outside tidied up, some new bumpers may be on the cards. Also, the interior is f**kING DISGUSTING, f**king smells of all sorts of nasty s**t and the seats have some weird stains. So the seats will be replaced ASAFP, my dad wants either the Recaro seats from the Type-R or the leather seats from the Executive trim level. But if I'm sly enough I may be able to get him to look aftermarket (If anyone's selling cheap Bride seats let me know). We may add some nice JDM influenced modifications too. Nothing too OTT, maybe some wind deflectors, a new steering wheel and some minor stickerage. The F18B2 engine isn't bad, not too sure if it's very tuneable, but tbh my dad's not too fussed about getting his hands dirty under the bonnet anyway, he would like some new wheels however and he did seem to like the idea of lowering springs, but we'll have to see how that pans out.
Anyway I've written WAY too much now
where can i get me one of those there gear sticks and how much is gunna have to come out my pocket?
shame about the car though, got a little project now
Just search on eBay for "JDM Drift Knob", I think it cost us something like £30 with postage and stuff. And it's cool I think, many a time my dad's said "We'll get a project going", but there was never anything that could realistically be done until now
SWEET.
s**t's got potential.
Do it ASAMFPN.
Woah I bet you did great down mt akina with that knob. You should get some tyte bbs lms nig.
RESPONSE
Thank you Alex
I did some quick measurements with my (dad's) trusty tape measure. For this car to be reasonably 'flush' yet practical we should aim to lower it 50mm on some 9 inch wide wheels. My dad likes Rota Grids (Fake Volk TE37s basically, we can't afford real ones). Rota sell them in 15x7 and 15x8 sizes. The standard wheels are 16x8, so we could put on some small spacers to get it sitting pretty.
the knob <3
does it lights up?
That knob is generic played out model.And wtf 2 ol schoolers are back?
shut up uiui
that knob is better than ur whole existance
Nah it doesn't light up Andrew, not that I know of anyway
Uiui, I am sorry that I'm not as JDM tight as you are, I'll try harder in future
@the stigster; Yeah I'm pretty lucky that my dad appreciates nice cars, that said everything has potential so if you can convince them to let you work on it
I was being sarcastic, dunno if you meant to or not but you came across pretty rude
Me rude?Why?Oh lets forget about this shall we?What about ur ex supercheap car?Lexus something?Its sold or still selling?
Alright then. It sold last week to some Romanian guys, won't be seeing it again now lol
I'm not going to lie, that shift knob is retarded, especially in a Honda.
Why?
Its a giant pink shift knob inside of a honda... need I say more?
It's called "Having a laugh with a cheap car". I don't see what's wrong with Hondas anyway
nothing is wrong with Honda's. Its just usually that's something you do to a drift or VIP car... and even then I think its stupid.
Dude, it's a gearknob, there's more important things to worry about on a car
I've never seen a Euro Accord before, but I like it haha it looks pretty cool. The tails remind me of Chaser. <33
it's his car, u can't stop him
umad? Just stating my opinion. I found this after a quick search. Its cheaper and looks loads better
http://www.ebay.co.uk/itm/JDM-Honda-EG4-EG6-EG9-EF7-EF8-EF9-CRX-5MT-Shift-Knob-/230666640765?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item35b4cd9d7d#ht_1713wt_952
But that knob doesn't have the humour aspect of the dildo knob. For the record the standard knob is very similar to that, just with black writing
*sadface* y u change nice knob to stoopid 1. I don't like when people do stupid stuff to a nice car just to be funny or follow a trend. I saw some guy at a car show hit his S13 with a hammar and etch words into the paint to make it look like a missile drifter. Pisses me off.
lol wat. You can't compare changing a gearknob to hammering bodywork
http://www.youtube.com/watch?v=jjy_7haflaM
Here's a photo I forgot to put up
Blue magic tree swag. Also just saw Brandon's edit, no there's none that we know of, it seems to run well enough, if something breaks it'll just get fixed, provided it isn't terminal, because that s**t would ruin my day
I just ask that you please change it back eventually after you've had your laugh. I really hate those shift knobs. lol
Ah that's pretty cool bud. Looks like a fun car to drive.
And duuuuuuuuuuuuuuuuude I like the shift knob. It makes you really jdm h0m13.
Okay, here's a list of modifications me and my dad discussed and that we'd like to do. In no particular order
- New headunit with iPod compatibility
- New speakers
- Subwoofer, nothing OTT, just something that give us some moderate bass and doesn't take up too much room or looks s**t
- New numberplates in different sizes
- Remove the 'Accord' and 'Sport' badges
- New wheels/tyres
- Lowering
- Laguna splitter, or an OEM front bumper with foglights and a lip, if such exists
- Wind deflectors
- Minor stickerage
- Spinners
- New exhaust, something that makes a nicer noise but isn't tacky or anything, nothing to in your face
- Paint cam cover, not sure what colour, not red though, don't want anyone to think we're trying to make it like a Type-R, because it isn't, performance wise anyway
- New seats, either the Type-R Recaros, Executive leather seats or maybe aftermarket ones
- New steering wheel, something swag like Nardi if my dad's feeling to splash out a bit
- Shark fin aerial
- Godfather or dixie horn
Along with repairing all the damage, there's some stuff that needs sorting, interior light isn't working for instance
This is what we want to do anyway, of course it's all down to money really
http://www.youtube.com/watch?v=K9P8FzF6d5s
dey don't stop
Very cool, the power of dreams...
Nice! I'm back.. just to comment on this. Love these accords, I believe the 2.2 typeV model has some of the bodyparts you're looking for.. (e.g. bumpers?) and I wouldn't put a nardi on it dude.. just cause it has a drivers airbag and its a daily, keep it safe.
To all you's bitchin' about the gearknob, it's not your car, you've stated your opinion, Bne likes it, it's just for a laugh, lets all chill eh?
Shafz.
Did I mention you should ditch the shift knob?
add a led under it, chicks dig it
really cool, ben. get the Rota Grid Drift just cause they look better (if you do go with the grids
curtis is cool guy :F
Curtis, I've already got links sorted for most of the stuff That being said I appreciate the info. Think we'll be saving up for lowering and wheels next, found http://www.venommotorsport.com/product_details.php?id=38683&manufacturer=Venom&category=Suspension springs, this was after I saw an advert in a magazine, I'll be searching properly for a good compromise between quality and value tomorrow, 35mm drop is enough. As far as wheels go, we'll be after 17" wheels, 9" inch wide on the rear and 8.5" up front, the fitment is 4x114.3 so if anyone knows any sweet wheels that aren't ridiculously expensive let us know, we'll have plenty of time before we can actually afford both (That said I'll be in a job soon, hopefully, so that'll speed things up a little bit). As far as modifications we'll go from the most expensive to the cheapest, so after lowering and wheels we'll fix the bodywork, then probably ICE, after that it'll just be smaller things like the splitter, aerial and all of that
That said some modifications are incredibly cheap so we might do the properly cheap ones now and get 'em out the way, like the debadging, we did that earlier, removed the rear Accord and Sport badge, still got some of that s**t left from the Sport badge though. Might see about getting the camshaft cover painted also
I'm gonna check out some Honda forums and such, hopefully I can pick the brains of other Honda owners and see what's what. It'd be cool if we could get this car on display at http://www.japfest.co.uk/ next year
Edit: Dat front bumper/fog light assembly/door mirrors/grille
http://www.racinglab.com/rota-p45f-009.html
no need to thank me
http://www.wheeldude.com/catalog/index.php?cPath=335_336_396
These guys usually have really good prices. Not sure if they do international shipping though.
Also, your talking about lowering your car and super wide wheels but have not mentioned anything about offset. You sure these are going to fit properly?
Psh who needs wheels that fit properly these days.
Well if you don't want your fender to shred your tire like a cheese grater or end up with wheels that don't fit cuz they are hitting the inside of your fender... then you should look into it. Your safest bet would be to find a pic of an accord that's lowered as much as you will be with wheels that you think fit perfect and then find out the wheel specs and if any extra modification was needed. If you can't find any information, I can help you out if you measure some clearances of the stock wheels for me. I can let you know what will fit, what will poke, and so on. I measured mine out and I think I did a pretty good job of getting them flush:
I do believe we'll be buying a brand new set specifically in Honda Accord fitment, so I presume the offset will be right, otherwise heads will roll
Wait, so your telling me that wheel shops recommend 9" wide wheels for your car O_o That barely fits my car.
i've seen people comfortably fit 11's under a golf before. older cars tend to have a bit more clearance than is absolutely necessary
get 30's
Wow...just.. wow...i really need to order one of these at ebay...then i can finally go on POWERSLIDE at fields..in my sierra 8) cool.
If you even consider Rotas for a second...
dead
^ this guy.
Rotas are fine.
I also have fake Pumas and fake Nikes that I bought while in Europe.
idgaf
who cares if rota makes replica wheels?
They just get a bad rep because a few have broken under extraneous conditions.
That didn't just break driving down a road. He took a corner too fast, overcorrected, went sideways and hit a curb. His car ended up on top of the curb. The wheel broke, yes, but his brake rotor also broke into two pieces. You can't tell me that "real" rims would have stood up to that abuse. They would have been just as screwed up as the rota wheel.
They're fine for anyone with a daily driven car that sees respectable street use.
if you not building a track beast go fake.
I posted a record setting track beast with Rotas, so it doesn't really matter. lol
I never said anything about the quality of the wheel
It's just fake s**t is for cheap ass people, buying reps is just an easy way out, so you can look cool in front of all the people that don't know otherwise
People that know better and people that have real s**t are going to think you're a tool because you have something that's a cheap copy of a real product
Not to mention the fact that replica wheels are theft of another companies designs, that's real cool. You guys get mad over stealing pixels, so what about something more material, it's theft either way.
There are few exceptions, but copies are just that, why get a copy of something unless there were only one or two produced. When it's two mass produced products, the one that's stealing designs is going to take business from the real companies. What happens when they have to quit manufacturing or jack the costs up? People that buy cheap knockoffs are the reason you can't afford real s**t in the first place
fake wheels save you money
Real wheels wouldn't cost so much if those manufacturers didn't have other companies selling their own product for half the price
This is ridiculous,those are just wheels, damn lol
Wheels are wheels, damn it.
There is almost no difference between Rota and real s**t if you use it normally
Except the fact that Rotas are goddamn counterfeit, lmao
plus they break in half if you look at them the wrong way
rips off are rips off
spending 100000000 dlls on wheels isnt the same as spending 1000 on wheels
actually rota means broken in spanish
but with that extra cost, you pay for quality also. not even that they'll fall apart on you. the cheaper the wheel is made, the less true it'd be. same thing with bike wheels, would you rather take a $10 rim or a $100 rim? the $100 rim would be better made and more true, which makes it better overall. i'd rather pay that extra money for the ease of mind
Plus, half the reason they're so cheap is because their designs are STOLEN, haha. No R&D costs of someone else designs the wheel for you
dat argument
For the record, this project is now over already. This is thanks to my dad being a general c-unit and kicking me out because he's an argumentative bastard who can't control his anger
O_o
I hope things work themselves out for you.
But in the defense of fake wheels... Maybe the real wheel companies would get more business if they dropped their prices. Their prices are inflated because they know people will still want and buy them and they still meet their profit goals. If they were losing money, they would drop their prices so fast it would be ridiculous. Its all about supply n demand. By the way, might I remind you that half of Enkei's wheels are knock-offs of other wheels. I would hardly consider Enkei a poser company.
This whole argument just reminds me of middle school kids who pick on the kid wearing K-mart sneakers because he doesn't have Nikes. Copying goes on in all markets. Are you going to pick on someone because they bought Wal-Mart brand apple juice instead of Motts? To say you are buying wheels just because of the respect you will get for them is retarded. Buy what you like, grow up, and stop hating.
amo voce tambem <3
walmart brand apple juice tastes better than mott's anyway. but i digress
I agree Mott's tastes like faggot. Off brand apple sauce ftw.
Rotas can be good though you guys are trippin.
You just have to make sure you're going fast enough, then they'll break and you can fly.
if your gonna drive it hard out and ramm into s**t of course rims are gonna break, genuine or fake. the matter is, if you want to look good with out spending alot of dosh, you get them replicas, but if you wanna look good (show car spec) you get the geniune poop.
poopoopoopoopoopooopoop
oh GOD
I would totally use Rotas if I was a drifter or something. They're cheap, why not?
cheap and easily replacable unlike genuine's.
it's hard to find a car in a top-tier racing series (ALMS, Super GT, DTM, Nascar, F1, etc.) with rotas lol. if they're the same thing why wouldn't companies spend less money and just get those
yea, if they are exactly the same, why wouldnt you.
I think you are directing your hate towards the wrong companies. Rotas are not true counterfeits because they never claim to be the actual real wheel. They come with Rota centercaps and Rota decals. There are companies out there that make straight up counterfeit wheels... complete with advan/volk/rays/etc centercaps, decals and etchings. Most of these aren't even safe enough to meet the international standards that Rota wheels meet to get the embossed stamps such as "JWL" http://en.wikipedia.org/wiki/JWL_standard . If your going to hate, hate on those companies. Rota started out making replacement wheels for OEM wheels. Its what they do and they never claim to be the original. When they first started out making aftermarket style wheels they had some failures which is why they have a bad rep today. It shows there was more involved then just "copying" a design. They have to do a lot of testing and adjusting to get the proper certifications.
Just a side note, I have nothing against expensive wheels other than the fact that they are overpriced. If you have the money for them and don't mind blowing it, by all means, get them. I don't appreciate when people get on other people's cases about stuff like that though. There is absolutely nothing wrong with getting rotas if the person buying them is okay with that.
Dude I wanna see that horse run would be funny as s**t.
I'm just gonna go release this now
Don't worry though! I didn't steal it because I never claimed to be you Mike
This is going wayyy too far now guys. At the end of the day, knock off wheels are like pirating music. Yeah, you know its wrong/illegal, but you do it anyway. Why, because, like many others out there you either can't afford, or can't justify the cost associated. I personally would have no problem buying rota (well, i wouldn't if i could afford them) as i don't have the money to get anything like that. For road cars, you're gonna buy the wheel for the looks, not the performance. Once you've picked a design you like, you're gonna go for the cheapest.
I don't think Rota hurt big companies much anyway. Because with the prices for the real deal, even with lower sale numbers they're probably making similar amounts of money anyway. Honestly Rota is probably the least of their worries, big companies could have had Rota taken out a LONG time ago by now if they were concerned I'm sure
dude rota is in forza 3, they're obviously cool
so they're both 6 spokes... oh well....
Doesn't Rota also replicate wheels you cant buy anymore? So that would be a plus wouldn't it?
They need to just replicate all wheels ever.
tbh, rotas dont even look the real thing.
They have the same shape and stuff but you can tell.
What would happen if Rota copied other off-brand wheels?
Is that just the lowest of the low?
There are other companies that copy rims as well. some of them have even copied rota's designs.
Even Konig has wheels which are copies of volk, work, gram lights and wantanabe wheels.
at least rota isn't doing this
^ my point exactly. lol
My Konigs are Advan RS-D knock-offs. The rims that Konig makes that aren't knock-offs are kinda ugly
I just love the fact that Konig rewinds:
Are rip offs of watanabe's:
Which are in turn rip-offs of minilites:
When you see it, you'll sh*t bricks. lol
what happened?
oh f**k, no offence but i hate familys like that
what a f**king f**kwit... walk back in there and shoot him in the leg with a nerf gun, then when he reacts call 999
Ben, I'm getting paid at the end of the month, WHAT-CHOO DOIN?
EDIT: realised that could be taken c**tishly, so:
Ben, I'm paid at the end of the month so I'll have petrol money - Whatcha' doing then abouts?
He's coming to meet me in coventry and you are doing the same.
In fact, at the end of the month we're having a halloween party and you are coming
dat Facebook
god dammit dude wtf. Good luck with everything then,no jk lol
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)